|
Product
Description:
Synergyn's Chill Out is a coolant
additive designed to make water wetter by
reducing it's surface tension characteristics
and thereby increasing the transfer of heat
from metal parts to the engines coolant.
Chill Out produces a coolant boundary
layer flow to absorb more engine heat and
carry it away. This results in lower
cylinder head temperatures, increased horsepower
and greater engine efficiency. This
advanced system of coolant boundary layer
flow also increases the cooling effect in
your radiator as more heat is transferred
back to the metal in the radiators fins and
passed on to the outside air. Whether
you are a racer using straight water or driving
a street vehicle requiring an anti freeze/water
mixture, Chill Out from Synergyn Performance
Products will provide maximum performance
through better cooling. Chill Out
is a blend of premium ingredients and modern
technology to double the wetting ability of
water while increasing the corrosion protection
that is needed with todays aluminium blocks,
heads, radiators, tubing, etc. The result
of long life for any engine. One 12
oz. bottle of Chill Out will treat
all average coolant system (3-4 gallons) for
up to one year.
|
User
Benefits:
|
Improved Heat Transfer
|
Long Term Corrosion Protection
|
|
Twice the Wetting Ability
|
Lower Cylinder Head Temperatures
|
|
Reduced Foaming
|
Maximum Horsepower/Torque
|
General
Applications:
|
All Racers
|
Pickup Trucks
|
|
Any Passenger Vehicles
|
All Diesel Engines
|
|
Motor Cycles
|
Commercial/Delivery Vehicles
|
Note: Chill Out is personally recommended
by Tony Cola, Chief Engine Builder for the Winston
Cup#40 car driven by Sterling Martin.
Chill Out, or a similar type product, is used by
every NASCAR team racing today, from Winston Cup
& Bush Grand National on down.
TYPICAL
SPECIFICATIONS:
|
Color
|
Pink
|
|
|
Specific Gravity
|
1.01
|
ASTM D-1298
|
|
Density Lbs/Gal
|
8.41
|
ASTM D-1298
|
|
Flash Point, Degrees F/C
|
N/A
|
ASTM d-92
|
|
Boiling Point, 15 psi, Degrees
F
|
254
|
|
|
Pour Point, Degrees F.C
|
30/5
|
ASTM D-97
|
|
PH
|
8.6
|
|
DIRECTIONS
FOR USE:
Remove
radiator cap (when system is cold) and pour one
12 oz Bottle of Chill Out directly
into Coolant in radiator. May be used in water
or 50% ethylene glycol solution or 50% Propylene
glycol solution. Replace Cap and run engine
to circulate and mix additive into coolant.
WARNING:
NEVER REMOVE THE RADIATOR CAP FROM A HOT ENGINE.
Note: One
12 oz. bottle of Chill Out treats
a standard size system (12-16 Quarts). For
smaller car or larger truck coolant systems use
at a rate of approximately 1 oz per quart of coolant.
Note: For
maximum performance and best protection against
aluminum corrosion and coolant foaming, retreat
with Chill Out every 15,000 miles.
Street Car/Truck Preventative Maintenance:
For maximum trouble free radiator life,
flush and replace coolant at least once every 2
years.
